How to configure your ADSL modem router for TPG IPTV

Wireless ADSL2+ Modem Routers, ADSL2+ Modem Routers

Before you begin, please note:
1. The TPG IPTV Trial service is currently only available to customers using ADSL2+ at TPG IPTV enabled exchanges.
Please go to http://www.tpg.com.au/iptv/exchange.php to check whether your exchange has IPTV service enabled.
2. The computer which you wish to watch IPTV from must be connected by wired (Ethernet) connection.
Configuration for IPTV:
1. Open your browser and enter 192.168.1.1 in your address bar, then press “Enter”.

2. Enter the username and password of your modem. By default it will be Username: “admin” and Password: “admin” or if you have changed this, please enter the new username and password.
3.(1) Click on “Advanced Setup” on the left side and click on “WAN”;
   (2) Check the existing connection, make sure the IGMP Multicast is enabled;
If it is already enabled, please go to step (3);
If not, please click on the “Edit” button and go through the settings to enable it;
   (3)Then click on “Add” button to create a new connection for IPTV.

4. In the VPI field type in “0”, in the VCI field type in “35”;
In the Service Category field select “UBR Without PCR”;
Tick the “Enable Quality of Service” box;
Click “Next”.

5. Select the “Bridging” option under Connection Type;
Select “LLC/SNAP-BRIDGING” as the encapsulation mode;
Click the “Next” button.

6. Tick the “Enable Bridge Service” box;
Type in “IPTV” as the service name;
Click the “Next” button.

7. Check the settings and click the “Save” button.

8. Click the “Save/Reboot” button.

9. After the reboot, please go to https://cyberstore.tpg.com.au/register/iptv.php to register for your Free TPG IPTV account. You must then follow the step-by-step guide to finish the on-line installation. If you require assistance with this, please contact TPG Technical Support on 1300 360 855.
NOTE:
1. The username and password are usually the same as your ADSL account;
2. You need to download and install the VLC software from http://www.tpg.com.au/iptv/download.php, this is an important step for IPTV settings;
3. In the “modem setup instruction” page, please choose “Other Modem”;
10. Once you have registered and configured your modem, you can begin viewing the TPG IPTV service. Please visit the TPG IPTV website at http://www.tpg.com.au/iptv , then log in with your username and password and enjoy your Free TPG IPTV service.

SHARE THIS POST

  • Facebook
  • Twitter
  • Myspace
  • Google Buzz
  • Reddit
  • Stumnleupon
  • Delicious
  • Digg
  • Technorati
Author: Ahmed Ezz View all posts by